Ceramic rubber composite plates are divided into two-in-one and three-in-one. Two-in-one refers to ceramic rubber composite plates, and three-in-one refers to ceramic rubber steel plate composite plates. Three-in-one composite plates come with bolts for easy installation.

[Product Features]

1. Impact resistance: Good buffering performance can effectively buffer the impact caused by ore falling from a height. The main raw material of the simple wear-resistant ceramic lining is alumina, which has wear resistance, but insufficient toughness. When the impact reaches a certain level, wear-resistant composite linings must be used.

2. Convenient construction: There is no gap after the lining is installed. The rubber composite lining can be twisted and cut, and is suitable for installing various special-shaped equipment.

3. No sticking or blocking: Due to the high strength and corrosion resistance of ceramics, the phenomenon of equipment sticking and blocking is effectively solved. Traditional nylon plates often stick to materials, affecting work efficiency.

4. Ceramic rubber composite plates have strong wear resistance, impact resistance, and corrosion resistance. Rubber elastomers have excellent vibration reduction effects and can reduce the noise generated during material transportation.

5. The density of ceramic rubber composite plate is lower than that of steel plate, and it is light in weight. In addition, due to its high wear resistance, it does not need to be replaced frequently, saving a lot of time and cost for enterprises.

[Connection method] Adhesive or bolt fastening, use high-strength organic adhesive to bond the composite plate or bolt it to the inner shell of the equipment to form a strong and cushioning anti-wear layer.

Product parameters:

1 Hardness (Shore A) 60±5°

2 Tensile strength (PSI) ≥14mpa

3 Elongation (%) 460%

4 Rubber ceramic bonding force 6

5 Operating temperature -40.150

6 Ceramic tile spacing 0.8-2.0

7 Rubber edge 1.5-2.0

[Scope of application] Anti-wear lining of various equipment and pipelines with a temperature of -40-100℃, such as drop troughs, hoppers, chutes, forklift shovels, coal hoppers, ball mill inlet and outlet pipelines, coal drop pipelines, etc.